by If you have recently purchased a Canon PIXMA MG3600 printing machine for your home or business use, the first thing is to open the box lightly and remove all the accessories, then place the device on a table. Plug the printer into the power supply slot, then start with the setup of the Canon mg3600.
Start by connecting all of its wires by consulting the printer manual. With an auto-connect button, WPS, you can connect your device. This allows devices such as printers and computers to connect on your network without the need to enter passwords.
Read:- How to Setup Canon Pixma Pro-100 Printer Guide
It also gives a quick and easy method of connecting your devices. By using the Canon support service, you can get support, as qualified and very talented technicians work here.
Method to Setup Canon PIXMA Printer MG3600
Follow the simple steps to Setup the Canon printer mg3600 printer.
Method 1: Method WPS Connection
If your access point has a WPS button, select “WPS connection method” without any confusion as this method is the easiest way to complete the setup of a Canon mg3600 connection with Wi-Fi. Take a look at the noted lines and follow the same instructions:
- First, make sure the printer is on and the WPS button is accessible on the wireless router
- Now press and hold the printer’s Wi-Fi button until the on light flashes.
- Press the “Black” button, then the “Wi-Fi” button
- Now make sure the Wi-Fi indicator is blazing fast and the ON indicator is on. Then go to your hotspot and hit the WPS button within minutes
- After that, you can see that the blue Wi-Fi light on the printer will blink while searching, and both the power and Wi-Fi lights blink when connected to the access point. After the printer successfully connects to your wireless network, the power and Wi-Fi lights stop blinking and remain on
- Finally, make sure the Wi-Fi light and the ON light are on
- After the above process is complete, the configuration of the network connection is now complete. If your device is still not connected, proceed to the next method to complete the Canon mg3600 setup process.
Method 2: Standard Connection Method
If your access point does not support the WPS function, follow the instructions below to configure your printer on your wireless network:
- When the initial screen appears click on “Start Configuration”
- Now the software will check the driver if it needs to be updated. If an update is required, the download will begin automatically. wait a few minutes
- Select your region and country, then click “Next”
- If you agree to the terms and conditions of the license agreement, click “Yes”
- If you want to participate in the extended survey program, click “I accept”, otherwise click “Do not accept”
- Click “Next” to authorize all “Setup Wizard processes”
- Select “Wireless LAN Connection”, then press “Next”
- Select “Connect via a wireless router”, then click “Next”
- Make sure your printer is on, then click “Next”
- Make sure “Printer settings are not found in the list” is selected, then press “Next”
- The installation guide will open, all you have to do is follow the on-screen instructions carefully
- Wait a minute when the installer detects the printer
- When the configuration is complete, click “Next”
- And then click “Exit”
I hope now you can set up the Canon printer mg3600 printer after the following steps. If you are not able to set up your canon printer then you can call Canon printer Helpline Number and connect with the technical experts.