by Some Issues related to fix Canon Printer Won’t Turn On – It’s not unusual for a printer and most users handle it on their own. To sort out the Canon printer not turning on you have to identify the cause. Sometimes it is just a simple problem as the power cord is not properly connected to the printer or the power outlet is not functioning! So, before you jump to worst-case scenarios and decide your printer needs replacing, run through these simple checks. If after doing all those things, you are still unable to resolve the problem, then you need to take some basic troubleshooting steps as prescribed in this blog.
More than likely, this will still make the problem continue but if it does, don’t hesitate to reach out to our Canon printer support specialists for further assistance.
Read: How To Fix Canon Printer Error Code U150?
Why Does My Canon Printer Won’t Turn On
Before we proceed and start following the troubleshooting methods, you can try finding out the actual cause why your Canon Printer won’t turn on. The following are the causes that can prevent your Canon printer from powering on.
- Your printer is disconnected from the power source.
- Your printer is not receiving a sufficient amount of power.
- Wrong printer configuration
- The problem with the printer adapter
- damaged power cord
So there undoubtedly were reasons why the Canon could not turn on. If you wish to eliminate all such issues, then move for the troubleshooting methods specified in the article below.
How To Fix Canon Printer Not Printing Problem
Try these solutions in sequence to get your Canon printer back to work and fix the issue.
1- Verify Your Canon Printer Is On
Sometimes you press the power button so hard or hold down the power button for more than a few seconds and the printer software may take hold by keeping the machine off.
Your printer won’t turn on if the printer access doors are open.
If you do, then unplug all the cables from the printer and leave it there for a minute there. After one minute, plug back in the cables and cords to the printer and turn it back on. It will reset your printer and clear any temporary issues.
Some printers have a power button near the power cord or the control panel as well.
2- Check the Power Code
A power cord links your printer to an electrical outlet. Without it, your printer won’t be able to get the juice it requires to run, and you won’t be able to print anything. Now in such cases, it’s your power cord that needs to be checked. Make sure it is attached to the printer and that the power switch is activated. Ensure that there are no damages and that it works correctly. The power cord is rarely damaged, but it is possible so you must have it looked at and replaced if it does not work.
3- Verify the Power Supply Set-Up. Then verify your power supply set-up
The printer setup has many different aspects depending on the printer type or model. Drivers. Some printers come with power cords that cannot be detached; others have detachable cords that users can easily remove. Some Printers Need to be Plugged into the Wall. The wall portion of the adapter is needed with some printers, and some do not.
4- Check the Printer Adaptor
Finally, it is also possible that your printer’s adapter is also behind the nonprinting of prints in Canon Printers. Canon printers are supplied with one of two types of AC adapters: a built-in AC adapter or an external AC adapter. But if the AC adapter is built-in, the power cord will not be removable. To power on the printer, you should only need to plug the cord into a wall outlet. If it fails to turn on your printer, you should examine the code for signs of wear. Finally, and if all else fails, you could try another power cord and see if that makes a difference. Do the same thing in the case of an external AC adapter and see if it works for you.
After you have attempted all the things above, you need to reboot your printer to see if it prints out.
Conclusion
Hopefully, your Canon printer won’t turn on problem is fixed after implementing the methods above. If you are still unable to start your printer or have any other problems, don’t hesitate to contact our printer customer care.