by Get instructions for connecting to Wi-Fi with the Canon M3600 printer. Read the next step by step procedure and follow the instructions on how to connect the Canon M3600 printer to Wi-Fi.
However, before starting, you need to check the WPS button method for some conditions:
- There should be a physical WPS button at the access point. For more information, see the user guide for your device.
- Use your network protocol or WPA security protocol for WPA2 (Wi-Fi protected). Suitable access points will be added with the use of WPS. To protect this you can use the WEP (equal protection) protection method or a cable. For more information about whether or not to use security mechanisms in your wireless network, check your computer’s wireless settings.
Read: How to Reset Canon Pixma Ink Cartridges?
Steps to Connect Canon M3600 printer to Wi-Fi
Steps 1: Make sure your printer is powered on and a wireless router and WPS button are available if needed.
Steps 2: Press the [Wi-Fi] button of the printer until the printer blinks the light.
Steps 3: Press the [Black] button, then press the [Wi-Fi] button. Make sure the Wi-Fi light is on. Press the [WPS] button after 2 minutes.
Step 4: The blue Wi-Fi lamp printer will continue to flash. When connected to an access point, the power and Wi-Fi lights blink. The printer is correctly connected to its wireless network. Power and Wi-Fi lights are not blinking, indicating that the connection is down.
Steps 5: Be sure to turn on any WiFi lights and lights
Verify network configuration. To ensure that your printer is connecting properly to your wireless network, you may need to print your printer’s network settings:
- Make sure your printer is working
- Bring a simple A4 sheet of paper or letters.
- Find the [Wi-Fi] icon and press the button until the power light flashes. Keep pressing on him.
- The network information page will be printed.
When checking hard copies, make sure the “Connection” for the “active” symbol and SSID (the name of your wireless network) is set to identify services that represent the name of your wireless network.
This is the WPS configuration process.
Now install the software.
If you do not know your product or are using a Mac, download the software.
After installing the software, do the following for a standard connection:
- When the initial screen appears, click [Configuration].
- You must update the software drivers. It may take a few minutes.
- Then select your region and country, then click [Next].
- If you accept the terms of the license agreement, click [Yes].
- If you want to participate in the extended survey program, click [I Agree].
- To allow the installation wizard to complete its process, click [Next].
- Select [Wireless LAN Connection], then [Next]
- The software will search for preconfigured printers on their network.
- It takes time, so be patient when searching for printers.
- A list of printers on your network is displayed under the “Network Printer” window. Click the correct printer to install the software.
- During this process, your computer and network connection are temporarily disabled while waiting for the printer to be installed.
- To register the printer, click [Next] (it will open in a web browser). Otherwise, click [Print].
- Click “Exit” to complete the installation.
Conclusion
Now after following the step you can connect Canon M3600 printer to Wi-Fi. if you are unable to after reading then you do not worry about you have another choice to it you can call printer customer care number +1-888-840-1555 it is toll-free 24/7 technical are available here. You can fix here all types of printer issues.