Rate this post

When using a Canon printer, users may encounter a wide variety of issues and error codes and the B200 is one of them. Usually, this error code is caused by a small hardware problem with the printer. However, in some cases, users have noticed that error code B200 also occurs on their printer due to software code malfunctions. Now, if you are one of those users who are experiencing this error on their printer and want to know the most effective ways to fix the Canon B200 printer error code, then follow this article. This is because we have provided these solutions for you here. Now without wasting time, let’s have a look.

Canon Printer Error Code B200

Reasons Of Canon Printer Error Code B200

The error code is related to several problematic factors with B200 printers and we have described some of them in this section. Check them out.

  • Ineligible ink cartridges and printheads
  • Damaged or improperly installed ink cartridges
  • Carts with wrong print
  • Dirty printhead contact pin
  • Obsolete printer drivers and applications. Now, if you have analyzed all the possible causes of this error, let’s have a look at the solutions.

Method to fix Canon Printer Error Code B200

To remove this error from your Canon printer, you need to follow some simple solutions and these solutions are given in this section. Take a look and try to perform them in the same way as directed.

Read:- How to Fix Canon Printer Error 6000

Method -1 Clean the Print-head and Ink Cartridge

In most cases, this error appears due to a faux ink cartridge and printhead in the Canon printer. Therefore, you need to start the solution work by cleaning them. Now follow the given steps to know the cleaning process.

  • Turn off the printer and unplug it from the power source
  • Then open the printer cover to reveal the ink cartridge.
  • After that, remove the printhead from the printer. Be careful while doing this, otherwise, your printer may suffer serious damage.
  • Once you have done this, clean the printhead from the ink cartridge.
  • Then you need to clean the printer’s contact pad. To do this, use a contact cleaner or a good eraser.
  • Now reinstall the printhead and ink cartridge in their place.

After installation, turn on the printer and run the automatic head alignment test. Now if everything is working as planned, the error code B200 from the printer will be cleared. And to verify this, give some print commands to your Canon printer.

Method- 2 Manually Adjust the Print Carriage

Sometimes Canon printer users come to this error code due to a print carriage misalignment issue and, there is a high chance that the same problem is causing a B200 error on your printer. Now, to fix this misalignment problem on your Canon printer, you have to follow the instructions given.

  • Turn off your printer and open Printhead Bay.
  • Then turn on the printer and wait for the print cart to go to the left,
  • Once it reaches the halfway point, close the lid. Then turn the printer back on.

Now your printer should start working without any trace of error code.

Method- 3 Clean the Print-head Contact Pin

After some time, the electronic contact pins in the print head are covered in dirt and grease and create error code B200 in the printer. Now, if you have the same problem with your printer, follow the cleaning steps below to solve it.

  • Open your printer, remove the ink cartridge, and uninstall the printhead.
  • Then clean the electronic pins with alcohol (isopropyl alcohol if possible) and make sure they are 100% clear.
  • Then, turn off the printer. But while doing so, do not use the power button. Instead, you have to do this by plugging it into the power cord.
  • Now you need to clean the electronic pins in your printer with the same cleaning alcohol.
  • Once you have cleaned them completely, allow them to dry for a few minutes. Then re-install the printhead and ink cartridge into your printer and turn it on normally.

After that, check whether giving the print job solved the problem.

Method- 4 Update Printer Driver and Application

In addition to the hardware problem described above, there is a good possibility that the error code B200 is appearing on your Canon printer due to a software issue. Most of the time, software issues related to this error code are outdated printer drivers and application issues. Therefore you need to start the software solution by updating them. Now to do this you need to follow some simple and precise instructions which are given below.

  • First, go to the Control Panel window and click on the Hardware & Sound option.
  • In the Hardware and Sound window, click Device Manager Options. This will open the Device Manager window on the screen.
  • There you need to locate and click on the Printers option so that it can be expanded. In this extended section, you will find drive options for your Canon printer.
  • Right-click on this option and open the context menu. In this menu, you will get the option of an updated player. Click on it.
  • Now a window will appear on the screen. In this window, you need to click on the option to search for drivers automatically.

After that, the update tool will search the web to find new printer drives for your system. If the device receives a new driver update, it will automatically install them on your system. However, if the tool doesn’t find anything, you should check for driver updates available on the Canon website itself, then download them manually to install. After updating the printer drivers, go to the Canon website again to download the new version of the Canon printer application. Once you update both, check the existence of the B200 error code.

Method- 5 Deep Cleaning

Now, if you do not want to manually clean your Canon printer, you can use a deep cleaning process for this task. To learn how to activate it on your printer, follow the instructions.

  • Click on the Start icon and choose the Devices and Printers option.
  • In the Devices and Printers window, you will find an option with the model name of your Canon printer. Right-click on this option.
  • A pop-up menu will appear on the screen. There you have to click on the Properties option. This will launch the Properties window on the screen.
  • In this window, you have to tap on the Maintenance tab and then click on the Deep Cleaning option.

Now your Canon printer will automatically start a cleaning process and you just have to wait for it to finish. After the cleaning operation is complete, perform a nozzle check using the Maintenance tab to ensure the Canon B200 printer error.

Method- 6 Canon Multi-Ink Cartridge Printer

Users who own models of Canon printers that can carry more than one ink cartridge may try to use all of the above solutions to correct this error. But, in the case of most Canon multi-ink cartridge printers, the error code B200 usually indicates improperly installed or damaged ink cartridges. You should investigate this problematic possibility before implementing a solution.

Conclusion

However, if even after implementing all the solutions given in the above sections, you are unable to solve the Canon MG5320 printer error code B200, there is a very high chance that your printer is suffering from a serious hardware problem. In this case, you should contact a technical expert to find effective solutions to these problems.

We hope that our solutions and suggestions regarding the Canon B200 printer error code are very useful for you. For more information about technology, follow our next articles.

Tagged With: