by The hugely popular Canon MG3022 is a powerful printer so it is one size fits all and comes with a host of cool features. With features like auto power on, built-in WiFi setup, and Pixma cloud storage, it’s almost hard to fathom a single reason why reinstalling a Pixma printer is so natural. The mixed-breed ink system includes shading inks for brilliant colors and dots, thick textured and dark-colored inks for fresh and clear materials. Interconnecting Remote Association of Canon MG3022 WiFi Printer to your PC is a very simple level. This article also describes the reasons for the development of remote interconnect using WPS Tech key association.
If you have a Canon MG3022 setup printer, you should find this printer’s remote design on the Internet that will handle your printer’s interface. However, at the same time, you can consider choosing the working system installed on your PC, whether it is Windows, Linux, Mac, or whatever. If you want to bundle mg3022 WiFi to set up your printer on PC using remote connectivity, you should look at two essential scenarios at this point:
Read: How To Fix Canon Printer Error B200 On Windows 10
- Make sure your Internet connectivity must provide a secure path to WiFi or sometimes WLAN with the introduction of a security protocol, as most wireless networks operate through this protocol.
- Also, make sure the Canon printer has a physical WPS dongle, the Wi-Fi device will have been securely configured in the access point. You can also consult your printer user guide to understand this
How to Install Canon MG3022 Printer Setup to Wi-Fi
- To get started, turn on the printer. Press and hold the Wi-Fi button until the indicator light lights up. Make sure the blue light is blinking.
- Now make sure that on your way the WPS button should be lit for at least 120 seconds. Also, note that there should always be a flash of blue light that will twinkle as you search for your way out.
- In the scenario where the update installation is successful, it will prevent both shutdowns.
- To confirm whether the process is successful, start printing with your Canon printer’s System Settings features.
- Keep a piece of paper.
- Click on the Resume button and then hold it down until the light flickers several sparks and discharges it soon.
- Your Canon MG3022 setup printer will print the System Data page, indicating that the installation was successful.
- The moment your printer is connected to your web affiliation, both markers are turned off.
How to check Canon MG3022 setup is installed correctly
- To confirm whether your printer is connected to your WLAN network device, you can run a test print to keep your record, which is the ultimate requirement in Canon’s MG3022 setup for Windows printers.
- Make sure your Canon MG3022 setup printer is running.
- You should check the connections on the screen of your Canon printer and ensure that your connections are “dynamic”.
- Check the name of your web connection, make sure it is your remote name that is causing trouble or not?
- Now make sure that high-quality A4 size paper should be put in the paper tray.
- Repeat the capture, holding it until the pointer streaks several times, then release it.
- Your test record will be printed.
Conclusion
I hope you know all steps to How to Install Canon MG3022 Setup to Wi-Fi. These are all very simple steps to set up a Canon printer if you have any issues then you can do a comment. Please do share with other the post.