by After printing several pages, Canon G2010 users often encounter error P07, and the power or error light blinks, preventing them from posting additional documents. Users usually describe this error as a hardware-related problem that requires the assistance of a service engineer, but you can fix it quickly at home if you follow the right steps. Accordingly, we will be discussing an easy and quick solution to the anon Canon G2010 P07 Light Blinking Error problem in this article.
Read: How To Fix Canon Printer Error P02 (Resolved)
What Causes the Canon G2010 P07 Light Blinking Error?
Most people encounter the P07 error on the Canon G2010 after printing several pages with the printer. The ink flow on their printer is directly responsible for this problem. The Canon G2010 printer includes built-in ink tanks, which greatly increases the amount of ink available.
The ink inside this printer, therefore, tends to overflow after printing several pages. However, the printer cannot solve this problem on its own; Hence it shows error P07 and stops printing.
You should know that ink overflow problems cause error code P07 on your Canon printer. Don’t panic, though, because your printer already has a mechanism for removing excess ink. You have to operate this system manually as the printer cannot do it independently.
First of all, if you do it right, you can solve Canon G2010 error P07. Anyone can do the cleaning process at their home as it is simple. Below we will describe the whole process.
How to Fix Canon G2010 P07 Light Blinking Error?
Now that you know the root cause of the P07 error on your Canon printer, it is time to explain the specific steps you need to take to fix this problem. You should carefully study all the steps before starting to run the solution.
In fact, you should repeat the same actions with minor changes. If you are careless, you may make mistakes and ultimately will not be able to solve this error on your Canon printer.
Step 1: Turn off the printer, then follow the instructions once you’ve turned off the printer by pressing the “Power” button on the control panel. Skip this step if the printer is turned off.
Step 2: Click or hold the “Power” button for more than 5 seconds, then while still holding the “Power” button, tap the “Stop” toggle five times.
Step 3: After pressing the “Stop” button four times, press the “Power” button once.
Step 4: Now click on the “Shut Down” button thrice and then click on “Power” once to complete the process.
Step 5: Press the “Stop” button five more times, then press the “Power” button once more.
The LEDs labeled “Green” and “Red” will flash alternately. This is the printer that cleans itself before servicing the ink flow system. Your device will automatically stop making noises once the process is complete.