by Hey! Are you a Canon user? Hope the printer is working fine or not holding up. I am writing this article for all users who are facing Canon error code e05. About 50% of Canon users face this problem and are in trouble. For your permission, I would like to inform you that Canon error e05 is a very serious problem that you are facing. The cause of this error is not very serious.
If you want to know the reasons for this error, just look at the bullet points mentioned below. The dots represent the problems that caused the Canon printer error code e05.
- Overheating.
- Effluence of the ink.
- Jammed paper.
- Uncleanliness.
- Overuse.
Read:- How to Fix Canon Printer Error c000
How to fix Canon Error Code E05
Here’s the secret to exit the Canon error code e05. Hope you definitely follow these steps accurately. So, are you ready to solve this problem on your own? Take a look below.
1- Turn off the canon printer
The first step is to turn off your printer. After turning off your phone, you can search for other steps. If you do not know, let me say that this problem is mainly due to overheating issue.
2- Disconnect network connection
- Before turning off the printer, please disconnect the Internet connection connected to your printer.
- To put the device into rest mode, you must separate it from anywhere.
So to solve this problem, please disconnect your device, or cancel an order if it is placed immediately.
3- Remove the cable
Dear users, if a LAN wire or power cable is connected to the printer, please unplug or unplug it. You must make the printer completely free.
4- Keep the printer in a cool place
- Due to the printer being too hot, after following the above steps, please keep your printer in a cool place. So that it cools down.
- Also make sure not to close the area. This will be a comfortable environment for your printer which will cause Canon e05 error.
5- Check ink cartridges correctly
- Sometimes the printer becomes too hot and begins to affect the ink in the printer. When the heat becomes too strong, the ink starts leaking and causes error e05.
- Please refer to the ink cartridge and be sure to replace the ink box if there is any leakage.
6- Check the internal parts
Ink can also get dirty due to ink leakage. Please take a piece of cloth, soak it in water and squeeze it well, then clean the printer parts thoroughly.
7- Check The Tray
If your printer has too many sheets, please remove half of them. Do not load the tray with too many sheets.
8- Look For The Paper
- If a piece of paper or a sheet of paper is stuck in your printer, please enter it correctly. Carefully to hide the stuck object.
- If you pull the paper hard, it can damage the internal parts of the printer.
9-Restart the printer
- Restarting the printer is the best process to resolve any problems. Therefore, without wasting any more time, just restart your printer.
- Before restarting, ensure that no commands will be given to the printer and also that the Internet must be disconnected.
- Be sure to plug in the wire to the cable, then wait at least 5 minutes, then plug the wire back. And turn on your printer.
- And there you go. See, how easy it was to deal with this problem.
Final
We hope you are now free from Canon error code e05. Are you empty now great, this is exactly what we want. Now you can easily access the printer without any stress.
Finally, we would like to thank you for always showing your trust and love. In addition, we will provide you the best quick steps.