Brother Printer Drum Error MFC-L3750CDW
Rate this post

Brother Printer Drum Error MFC-L3750CDW is a widespread trouble that can stop you from taking your printing career. This is a common error message and usually indicates that the drum unit is dirty, not properly installed, or in need of replacement. However, the Brother Printer Drum Error MFC-L3750CDW is well within reach with these explicit details on how to resolve it. Here, we are resolving the issue in a quick and simple format in this 750-word guide to help you troubleshoot your Brother MFC-L3750CDW printer from home.

Also Read: Canon Pixma G3202 Not Printing Black

What Drives the Brother Printer Drum Error MFC-L3750CDW

Brother MFC-L3750CDW Drum Unit: Transfer toner onto paper works as a printed treaty for the same. General Reasons for the Brother Printer Drum Error MFC-L3750CDW

  • Corona Wire: The corona wire is fundamental in transferring the toner powder to paper; however, dust or toner buildup can be disruptive to printing.
  • Drum Life End: Approx 18,000 pages (drum unit DR-253CL)
  • Non-Genuine Supplies: Any use of drum units that are not specifically designed for Brother printers can make the device malfunction.
  • Wrong Installation: Five reasons why the Brother print error message 76 may occur again may be due to the bad installation of the drum units.
  • Firmware Not Updated: A Bug in the software could cause repeated error messages.

Knowing the causes of vision problems will also help in diagnosing the proper solution for it. As mentioned, here are the steps to fix the Brother Printer Drum Error MFC-L3750CDW

Comprehensive Solutions to Fix the Drum Error

1. Clean the Corona Wire

The Brother Printer Drum Error MFC-L3750CDW is often caused by a dirty corona wire. The first step in reviving your interest in reading is to clean it up.

  • Stop the Printer: This will involve reconnecting and disconnect your Brother MFC-L3750CDW printer for security from the Brother MFC-L3750CDW device.
  • Access the Drum Unit: Open the front cover, and you will see the drum and toner cartridge unit.
  • Extract the Assembly: gently take out each of the drum and toner cartridges (black, cyan, magenta, yellow). If there is toner left over, always put it on a clean, disposable surface to avoid spills of toner.
  • Clean the Corona Wire: Find on each drum unit a green tab. Rub the wire back and forth (3–5 times) to clean the wire. Assure the tab goes back to where it was.
  • Reinstall and Test: Go ahead, put the assembly back into the printer, close the cover, plug in the power, and print a test page to see if this makes the Brother Printer Drum Error MFC-L3750CDW go away.

2. Reset the Brother Printer Drum Error MFC-L3750CDW

We can clear the error by resetting the drum counter if cleaning does not work, especially when a new drum is installed.

  • Turn on Printer: Check that the printer is turned on and the front panel is closed.
  • Start Menu: Hit the button on the control panel to enter the menu. Touchscreen models: Press the X (cancel) button and then press-and-hold # to enter Reset Menu mode.
  • Drum Reset: Use the Arrows to Select All Settings -> Machine Info -> Reset -> Drum. Touchscreen models: Tap Drum (ON) → RTAL←
  • Confirm the Reset: Press one ‘Yes’ or OK to reset. An “Accepted” message will appear on the screen once done.
  • Printer Test: Take a printout to check if the error is gone.

3. Check the Drum Unit Compatibility and Install it

Bogus drum units or inappropriately installed ones may also raise a Brother Printer Drum Error MFC-L3750CDW error message.

  • Check Compatibility: Make sure that this drum unit is compatible with the Brother MFC-L3750CDW.
  • Put Back Drum: Take out and put the drum unit back in again to have it sit well. You want to hear a click to make sure it is installed correctly.
  • Inspect for Junk: It could be the paper inside the drum compartment, toner flakes, or any other debris. Remove any obstructions carefully.

4. Update the Printer Firmware

Brother Printer Drum Error MFC-L3750CDW. This error occurs due to the outdated firmware or if there are any software glitches.

  • Check for Updates: Menu > All Settings > Machine Info > Firmware Update > Check for update on the printer.
  • Update your device: Go ahead and download other firmware updates according to the instructions. Restart the printer afterward.
  • Test it again: Try printing another document to make sure the error is gone.

5. Replace the Drum Unit

In cases where the drum unit may expire, you cannot avoid replacing it to resolve the Brother Printer Drum Error.

  • Get a New and Original Drum: Purchase a new drum (DR-253CL) from Brother’s official website or see if you can buy it from local stores.
  • Cost to replace the Drum: Similar to cleaning, except you remove the old drum and install a new one. Ensure proper alignment.
  • Counter Reset: After replacement, you will need to reset the counter of the drum according to what is described in step 3 to get rid of it.

How to Avoid Future Brother Printer Drum Error MFC-L3750CDW Mistakes

To fix the Brother Printer Drum Issue permanently:

  • Dr-253CL Ultimate Drum: Units Brother /Compatible Toners Make a point of only using supplies that are made by Brother, including the DR-253CL drum unit and compatible toner.
  • Regular Maintenance: Clean the corona wire every few months to clean away buildup.
  • Firmware Upgrades: Monitor the firmware updates and maintain the performance of the printer.
  • Be Gentle with Parts: Prevent damaging the drum during installation by not touching its surface.

When to Seek Professional Help

If the issue, like Brother Printer Drum Error, remains the same, then there can be a hardware problem. Reach out to Brother support on their official website or customer service. Your printer is covered by the warranty, and you will receive free repair or replacement parts.

Conclusion

These were the complete steps that are effective enough to resolve the Brother Printer Drum Error MFC-L3750CDW. There are several troubleshooting steps for this type of issue, like cleaning the corona wire, resetting the drum counter, and making sure the machine is in ready mode for installation or firmware update. Replace Drum Unit. Preventable by keeping the printer maintained (cleaning, maintenance of rollers) and using genuine Brother supplies (toner, drum), this error can be permanently eliminated, allowing you to print without problems. By following these steps, you will fix this error easily.

Tagged With: