by The Brother MFC-7360N is considered a reliable all-in-one printer, but it does experience errors from time to time. Whether it’s a “No Paper” message, jammed paper messages, or even “Toner Empty” your printer throws an error, we can help. This all-in-one solution provides instructions for an easy troubleshooting process to solve those common issues of the Brother MFC-7360N Printer Error and get your printer back up and running in no time.
Read: How To Replace And Manage Canon Pixma TR4722 Ink Efficiently
Understanding Common Brother MFC-7360N Printer Error
Before you get into resolving the issues, you should be able to recognize the type of Brother MFC-7360N Printer Error 75 that you are having trouble with. Common issues include:
- No Paper Error: No Paper Error is when the printer has paper in the tray.
- Toner Empty or Replace Toner: If you change the toner and get this message, the machine still doesn’t see the new toner.
- Deep Sleep Mode: To resolve this issue, the printer can not be woken from Deep Sleep mode it appears as a Deep Sleep.
- Print Unable EF: An F power-cycle error is displayed.
- Offline or Network Problems: The printer does not print over a network or indicates it is offline.
There can be different reasons behind these errors, from something as easy as paper misalignment to more complex ones that involve hardware. Let’s explore the solutions.
Step-by-Step Troubleshooting for Brother MFC-7360N Printer Error
1. Fixing the Brother MFC-7360N Printer No Paper Detected Issue
Brother MFC-7360N Printer Error: No Paper Despite a full tray. If you are seeing an error message on your Brother MFC-7360N that says something like “No Paper” even though the paper tray is properly loaded, you might have a bad version of the software. It is usually due to paper Loading or the paper feeder being broken.
- Check Paper Tray: Remove the paper tray and make sure the paper is placed correctly. Slide the paper guides to the size of paper you are using so they are snug, but not too tight. For letter-size paper, set the rear guide to the “LTR” mark in the tray.
- Examine Rollers: Paper feed rollers covered with dust or paper dust are unable to detect paper. Wipe the rollers with a water-dampened, lint-free cloth. Rollers do not rotate freely. The Feeder Cam Lever (part LY2579001) may be out of place or broken. A new one is $5.95 or so, easy to R&RNB with minimal disassembly.
- Check Tray Settings: From the printer menu, find General Setup, then Tray Use. Make sure you set the right tray (Tray #1 or MP Tray) as the paper source for your print job.
2. Fix Toner Empty or Replace Toner Message
If you have already replaced the toner and continue to get the “Replace Toner” message, do the following:
- Use Genuine Brother toner: The Toner Life End Soon Error may or may not reset the toner counter. Make sure that you are using a new Brother toner cartridge (TN360/TN330 or TN420/TN450) with a new drum unit.
- Toner Setting: In menu Mode, press 1, and then press 8 to access the toner setting. Please select “Continue mode” in the machine setting menu to ignore the “Replace toner” message until the toner runs out. If the LCD “Toner Ended,” install a new cartridge.
- Reset Toner Counter: When a new toner is installed, close the front cover, hold down the Clear button to open the Reset Toner Stamp screen, and then click Yes to reset the counter.
3. Fix Deep Sleep Mode Issues
You’ll need to put the printer in “Maintenance” mode (n.b. NOT “Deep Sleep” mode) before you can actually do the reset. If done correctly, the printer will enter the “Deep Sleep” mode.
- Wake the Printer: Press any button on the control panel to wake the printer from the Deep Sleep mode. If it doesn’t, power-cycle the printer by unplugging it for 30 seconds.
- Print Jobs: Make sure you don’t have any pending print jobs in the queue. Open the printer queue on your computer and remove any jobs that are stuck.
- Update Firmware: Go to the Brother Support website. brother.com and download the newest firmware for the MFC-7360N.
4. Troubleshoot Print Unable EF Error
The Print Unable EF message is commonly found when a hardware or internal issue occurs.
- Power Cycle: Shut the printer off, and disconnect its power cable for a couple of minutes before turning it on again. This may clear temporary glitches.
- Look for Obstructions: Open your printer and look for any issues such as jammed paper, dirt, or dust. Wipe down the inside carefully with a dry cloth.
- Get in touch with Support: If none of the above methods brought a solution, the problem might be dependent on professional maintenance. For more information about the Brother Printer Error, please contact Brother Support or a Printer technician.
5. Fix Network or Offline Issues
If your printer is offline or not printing over a network, use these steps:
- Check Connection: For USB connections, connect to a different port or use a different cable. For networks, don’t let the printer enabled with a dynamic IP address get disconnected while it sleeps.
- Reinstall Drivers: Visit Brother’s website and download and install the most recent drivers from Brother’s site and compatible with your OS (Windows 11 or macOS). Uninstall your current drivers, reboot your computer, and then reinstall.
- Network Reset: Reset all network settings by using Menu > Network > Network Reset. Reconfigure the network settings afterward.
Preventing Steps To Stop Brother MFC-7360N Printer Error
- Prevention: Keep your printer clean by constructing by using compressed air to remove dust and debris from the printer’s rollers, surfaces, and other interior components.
- Update Drivers and Firmware: Keep an eye on the company’s support.brother.com for further updates to compatibility and performance.
- Quality Supplies: Only use Brother genuine toner and drum for best results based on system 34. Use genuine Brother toner to receive genuine Brother quality.
- View Printer Status: Check the status of your printer and any error messages on your printer using the Brother iPrint&Scan app.
When to Seek Professional Help
If the above steps do not work to solve the Brother MFC-7360N Printer Error, then the issue may be connected to a hardware problem, which is the failure of the sensor or the circuit board. Contact Brother Support at brothersolutions.com or an authorized service center. If your printer is still under warranty, Brother may be able to repair or replace it without any charge.
Conclusion
Brother MFC-7360N Printer Error- Can it Be Fixed? Solving common problems such as paper feed issues, toner errors, Deep Sleep mode, or network-related problems is bound to fix your printer and allow you to print all over again. Use Brother supplies, keep drivers updated, and perform routine maintenance to prevent errors. For continued issues, Brother’s free support is available, or you can contact a professional for technical assistance. So now that you are ready to solve any problem you encounter with the Fumbling MFC-7360N Printer Error, it’s time to keep printing!